ARTURO STARK. THE FLOOR THAT EVERYBODY WANTS

The self-smoothing floor system that is super strong, available in a range of stunning colours colours and easy to clean! Arturo has developed the ultimate self-smoothing floor system. Introducing Arturo Stark!

The ultimate self-smoothing floor

Due to a combination of existing and new Arturo products, you can install a self-smoothing floor system of the highest quality! Arturo Stark is wear, crack, scratch-resistant and UV-stable. Suitable for light to medium loads and therefore ideal for use in houses, offices, stores, restaurants, health centres and schools.

Cracks are history

Several factors can cause a subfloor to crack such as settlement, cure shrinkage, or failure to properly commission under floor heating. With the new Arturo membrane, cracks are history. The membrane has been tested in combination with various Arturo PU self-smoothing floor systems and has achieved the highest crack bridging class (A5). This ensures that the static cracks up to 2.5mm are bridged.

ARTURO STARK. THE WEAR, CRACK, SCRATCH-RESISTANT AND UV-STABLE FLOOR SYSTEM

THE ARTURO STARK FLOOR SYSTEM

Arturo Stark consists of 4 layers, which in combination, make the ultimate floorsystem. So, always use these products when someone asks about Arturo Stark. These are:

  1. Subfloor
  2. Arturo Primer EP6500
  3. Arturo Membrane PU6000 (NEW)
  4. Arturo PU2030 or PU2050 (NEW) Self-smoothing floor
  5. Arturo sealer PU7310

Arturo Stark brochure

Do you want to know more about Arturo Stark? In this brochure you will find more information on the system, applications, layer thickness, consumption and packaging.

View the brochure

Arturo Stark floorsystem

With the introduction of Arturo Stark, Arturo is also introducing two new products, namely the PU2050 and the PU6000

Arturo PU2050

Arturo PU2050 is the new self-smoothing floor from Arturo. Intended as a decorative finish over common subfloors such as cementitious and anhydrite screeds. Because of its flexibility, the floor is highly suitable for light to medium loads and is ideal for retail, schools, and offices.

Properties

  • Flexible
  • Low emission, AgBB certified
  • Self-smoothing without the need for spike rolling
  • Crack bridging
  • Low impression sensitivity
  • Good damage/point load resistance
  • Available in all RAL, NCS, and Sikkens colours (and in the Colour Collection)
  • Can be finished with a gloss, (silk) matte, or extra matte sealer
  • Suitable for caster loads

More information

Arturo PU6000

Arturo PU6000 is suitable as a scratch coat and as a crack bridging membrane under Arturo coatings and self-smoothing floors. Ideal as a membrane/crack bridging layer under the Arturo PU2030 and PU2050 self-smoothing floors.

Properties

  • Crack bridging
  • Good adhesion
  • Airtight seal surface
  • Self-smoothing
  • Low emissions, AgBB certified

More information

References Arturo Stark


Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools